中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 13126-2009 机电产品湿热带防护包装通用技术条件(中英文版) General specification for damp heat protective packaging of mechanical and electrical products |
|||
GB/T 24356-2009 测绘成果质量检查与验收(中英文版) Specifications for quality inspection and acceptance of surveying and mapping products |
|||
GB/T 24351-2009 立式逆流颗粒冷却器 通用技术规范(中英文版) Universal technical specifications for vertical counter-flow - Pellet feed coolers |
|||
HJ 497-2009 畜禽养殖业污染治理工程技术规范(中英文版) Technical specifications for pollution treatment projects of livestock and poultry farms |
|||
JTS 147-2-2009 真空预压加固软土地基技术规程(中英文版) Technical Specification for Vacuum Preloading Technique to Improve Soft Soils |
|||
DL/T 1109-2009 输电线路张力架线用张力机通用技术条件(中英文版) General technology specification for tensioners pulling conductors under controlled tension of overhead transmission line |
|||
DL/T 5407-2009 水电水利工程斜井竖井施工规范(中英文版) Construction specification of inclined shaft and vertical shaft for hydropower and water resources engineering |
|||
DL/T 662-2009 六氟化硫气体回收装置技术条件(中英文版) Specification for SF6 gas refilling and recovery device |
|||
DL/T 5410-2009 中小型水力发电工程地质勘察规范(中英文版) Engineering geological investigation specification for medium-small hyower projects |
|||
DL/T 1117-2009 核电厂常规岛焊接工艺评定规程(中英文版) The specification of welding procedure qualification for Conventional Island of nuclear power station |
|||
DL/T 1110-2009 卧式蒸发冷却电机基本技术条件(中英文版) Fundamental technical specifications for evaporative cooling horizontal electrical machinery |
|||
DL/T 1120-2009 水轮机调节系统自动测试及实时仿真装置技术条件(中英文版) Specification of autotest and real-time simulation to for hydraulic turbine governor |
|||
JJF 1224-2009 钢筋保护层厚度、楼板厚度测量仪校准规范(中英文版) Calibration Specification for Reinforced Concrete Covermeter and Floorslab Thickness Tester |
|||
JJF 1223-2009 驻波管校准规范(驻波比法)(中英文版) Calibration Specification for Standing Wave Tubes(Method Using Standing Wave Ratio) |
|||
GB/T 24132.3-2009 室内装饰用塑料涂覆织物 第3部分:聚氨酯涂覆编织织物规范(中英文版) Plastics-coated fabrics for upholstery - Part 3: Specification for polyurethane-coated woven fabrics |
|||
GB/T 24132.2-2009 室内装饰用塑料涂覆织物 第2部分:聚氯乙烯涂覆编织织物规范(中英文版) Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics |
|||
YD/T 1916-2009 ipv6网络设备技术要求——宽带网络接入服务器(中英文版) Technical Specification for IPv6 Network Equipment. Broadband Network Access Server |
|||
CJ/T 310-2009 城市轨道交通直线电机车辆通用技术条件(中英文版) General technical specification of linear motor vehicles for urban mass transi |
|||
CJ/T 310-2009 城市轨道交通直线电机车辆通用技术条件(中英文版) General technical specification of linear motor vehicles for urban mass transi |
|||
GB/T 14713-2009 旋切机通用技术条件(中英文版) General specification for veneer lathe |
找到:2127條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [57] [58] [59] [60] [61] [62] [63] |